![]() ![]() Using the MOVE and COPY commands are a big part of that productivity. One of the real benefits of using a CAD program is increasing your design and drawing productivity. Fill out titleblocks in Paper space using the AutoCAD 2D book Standards.Describe how to construct a tangent arc that has one end tangent to a line and other end going through a point.Apply the FILETAB and FILETABCLOSE commands to enable the display of the open drawing file tabs above the Graphic window.Apply the MOVE, COPY, COPYCLIP, PASTECLIP, and COPYBASE commands to move and copy objects in the current drawing plus copy objects from one drawing to another. ![]() ![]() Describe how to move and copy objects in the current drawing and from one drawing to another.Thus, if you want to copy and paste a block, you'll need to use one of the two methods described above.When you have completed this module, you will be able to: The labeling system will become confused, and your plant counts will be off. In the case of planting, using the Copy command to copy a plant or its label will create problems because they system will think you have two versions of the exact same plant in your drawing. This will in turn create problems with your overall irrigation system. The Copy command essentially creates a "clone" of the original block, pulling the exact data associated with it and applying that identical data to the new copy.įor example, if you use the CAD Copy command to copy and paste a piece of irrigation equipment, the system won't just think you've placed a new piece of equipment of the same type – it will think you've placed that exact same piece of equipment, with all the same piping and flow data. How Not to Copy Blocks – DO NOT Use the AutoCAD Copy CommandĪ note of caution: Do not use the AutoCAD Copy command to copy blocks. The blocks will be exploded and editable. If desired, you can draw a window to select multiple blocks. Select the block or blocks you'd like to explode. If you want to edit the blocks, you can then explode them: Type EXPLODE in the Command line. Confirm that all blocks you've inserted are in the correct locations. Method #2 involves using the CAD WBLOCK ( Write Block) command. This method also creates a digital trail for copied items, which you may prefer. You'll only need to use this method if your copying Clipboard is not available – for example, when you need to copy blocks across machines or offices. Click a location in your drawing to place the blocks. The Command line will prompt you to Specify insertion point. To paste the blocks, press CTRL + V (Windows keyboard) or Command + V (Mac keyboard). You can also draw a window encompassing several objects. The Command line will prompt you to Select objects. To copy one or more blocks, press CTRL + C (Windows keyboard) or Command + C (Mac keyboard). (You can also use these commands for copying and pasting plants and labels within a single drawing, although our XCOPY and XCORO tools are much more useful.) The quickest and easiest way to copy and paste blocks between drawings is to use the standard copy and paste keyboard commands. If you use XCOPY or XCORO on plants and labels separately, they will lose their associations. Important: When using XCOPY or XCORO to copy plants and labels, use each tool on both the plant and its associated label at the same time. If you need to rotate the copied labels, use XCORO. XCOPY runs the copy portion of the AutoCAD Move, Copy, Rotate ( MOCORO) command, while XCORO runs the copy and rotate portions of the same command. Our XCOPY and XCORO tools provide the best methods for copying plants and labels within the same drawing. Power Tip: XCOPY and XCORO for Repetitive Design ![]()
0 Comments
Leave a Reply. |